3D model , Knife sharpening machine for 3D PRINTER

Affiliates: 0,53 $how to earn
Pay with:
i agree with "Terms for Customers"
Sold: 77 last one 21 hours ago
Refunds: 0

Uploaded: 15.10.2019
Content: 3D MODEL Sharpening_machine.rar 30522,33 kB


3D model , Knife  sharpening machine for 3D PRINTER 3D model , Knife  sharpening machine for 3D PRINTER 3D model , Knife  sharpening machine for 3D PRINTER 3D model , Knife  sharpening machine for 3D PRINTER 3D model , Knife  sharpening machine for 3D PRINTER 3D model , Knife  sharpening machine for 3D PRINTER 3D model , Knife  sharpening machine for 3D PRINTER 3D model , Knife  sharpening machine for 3D PRINTER

I sell 3D MODEL Sharpeners with a rotary mechanism, which you can print on a 3D printer.

There are 3 folders in the archive:
- 3D model BONUS - these are the sources of the 3D model of the sharpener, with the help of which you can edit it completely, if necessary.
- STL for printing ABS - files calculated with shrinkage of 0.3 mm
- STL for printing PLA-PETG - files calculated with shrinkage of 0.2 mm
If you have other shrink parameters, then use the source files from the folder (3D model BONUS), they are in Autodesk Inventor 2017 format (.ipt-.iam)

What you need:
1) A smooth shaft for stone holders with a diameter of 8 mm and a length of 600 mm = 1pc (on the one hand, you can cut the m8 thread to twist the handle, or you can just press it in. - http://ali.pub/31bwxq
2) A smooth shaft for attaching a frame with an diameter of 8 mm, length 180 mm = 1pc, this shaft is pressed into the frame, so we try not to loosen the holes (we need to cut 20 mm length m8 on it, and 50 mm on the other side) We twist into the handle of our frame with the short side .
3) M8 hairpin 235 mm long, which we insert into our gear rack. = 1pc,
4) M8 hairpin with a length of 35 mm, which holds our hinge = 1pc.
5) A smooth shaft with a diameter of 6 mm and a length of 70 mm, into which we press in the gear for our rack and pinion mechanism = 1 pc.
6) Hairpin M6 50 mm long, for hold-down lips = 2pcs
7) A hinge with a diameter of 8, under our smooth shaft = 1pc http://ali.pub/2jnfuh
8) Two backlashless bushings 8 * 11 * 30mm, for our shaft, which holds the frame. http://ali.pub/3u5kbg
9) Nut M8 = 4pcs
10) M4x20 bolt = (type DIN 912 for hexagon) = 2pcs for hold-down lips
11) Self-tapping screw 4x25 mm = 4 pcs for rack gear
12) Bolt M6x35 = 4pcs. for fastening the rotary mechanism to the bed.
13) Nut m6 = 6pcs
14) Spring = 25mm for a shaft with a diameter of 8 (stone holder) = 2pcs, put one in the end as a stopper, and the second for shaking blanks.
15) Spring = 15 mm for tightening the rack mechanism = 4pcs, we will put on our screws.
16) A central spring with an inner diameter of 12mm or more and a length of 60mm or more, this spring will fit on a sleeve with an outer diameter of 11mm.

Plastic took the simplest and cheapest ABS FROM Plexiwire, just take flesh-colored it is stronger in my opinion.
I set the wall thickness from 1.8 to 2.6, this is according to the situation, so that in KURA the layer thickness does not burn red (that is, an excess of thickness)
Percentage Filled:
Frame - 60% (better than 100%)
Hold-down lips -100%
swivel mechanism -40%
rack and pinion - 100%
-50% rail mechanism
pen -25%
clamps for stones -100%

How to place details on the table; better see the very first prototype of the sharpener - https://youtu.be/ZWA6VxIrHcQ?list=PLQosuvJLVe5cAPTleZomIT-BwBruBR3Pg&t=105

Additional information

Apex Edge Pro with swivel mechanism http://ali.pub/2zg10h
Grinding machine RUIXIN PRO III http://ali.pub/2q7rr3
Tool Sharpening Tool Kit 5 http://ali.pub/2y5nnx

Electronic goniometer http://ali.pub/332z86

Water stones YJSHARP http://ali.pub/3c5v42
Water stones Unilateral http://ali.pub/31vf8y
DIAMOND STONES http://ali.pub/2y5n8d
PROFI Oil Stones http://ali.pub/2wzsx4
Adaee Pro Stones http://ali.pub/2pu5v6
Set of STANDARD stones http://ali.pub/2hsisy

Damascus knife Santoku http://ali.pub/2wztdn
Folding Knives Shop http://ali.pub/2wzuz7

Furniture Castors for sharpener Crutch http://ali.pub/32a2sc
Bolts for hexagon m4 http://ali.pub/31tvap
A set of dice and swords http://ali.pub/31tzza
Magnets for the machine http://ali.pub/2qh67r

Help channel QIWI wallet +380509027210

VIDEO INSTRUCTIONS https://youtu.be/9xFq7C0gm7o
The machine for KNIVES and SCISSORS https://youtu.be/Nd7KgyDISPk
GRINDING MACHINE START https://youtu.be/9xFq7C0gm7o


Архив получил!Начну печать деталей.2019-10-16
Выглядит вполне достойно. Буду печатать.2019-09-30
Спасибо! Отправился печатать!2019-09-29
In order to counter copyright infringement and property rights, we ask you to immediately inform us at support@plati.market the fact of such violations and to provide us with reliable information confirming your copyrights or rights of ownership. Email must contain your contact information (name, phone number, etc.)