Individual´nyy zhiloy dom 24/5000 Individual residentia

The contents of the explanatory note:

Exercise 1
Schedule for the implementation of a comprehensive course project - 2
Annotation - 3
Introduction - 6
1. Features of design solutions for residential and public buildings - 7
1.1 General part - 7
1.1.1 Construction Area - 7
1.1.2 Volumetric planning solution - 7
1.2 Architectural and constructive solution - 7
1.2.1 Foundation - 7
1.2.2 Walls and partitions - 8
1.2.3 Overlaps - 8
1.2.4 Ladders - 8
1.2.5 Roof, roof, drainage - 8
1.2.6 Windows, doors - 9
1.3 Finishing - 9
1.4 Explication of floors - 10
1.5 Specification of the elements of filling openings - 10
1.6 Specification of prefabricated elements - 11
1.7 Engineering equipment - 11
1.7.1 Power Supply - 11
1.7.2 Sewerage - 11
1.7.3 Water supply - 11
1.7.4 Gas supply - 11
1.7.5 heating system - 11
1.8 Technical and economic indicators - 12
2. Features of the design of building structures - 13
2.1 Calculation of the Foundation - 13
2.2 Determination of the elevation of the base of the foundation - 14
2.3 Determination of the number of foundation blocks by height - 14
2.4 Determination of the width of the pillow - 14
2.5 Collecting loads - 15
2.5.1 Calculation of the load on 1m² roof - 15
2.5.2 Calculation of the load on 1m ² of the cover plate - 16
2.5.3 Calculation of the load on 1m² floor slab -16
2.6 Calculation of the load on 1 basement length - 17
2.7 Determination of the required width of the foundation cushion - 18
2.7.1 Determination of specific friction and angle of internal friction - 19
2.7.2 Determination of the calculated resistance R - 19
2.7.3 Specification of the width of the strip footing cushion - 19
2.7.4 Checking the selected base cushion width - 19
2.8 Calculation of strip footing on the material - 19
2.8.1 Load, taking into account the reliability coefficient of responsibility - 19
2.8.2 Determination of soil resistance p - 20
2.8.3 Determination of the length of the cantilever basement section - 20
2.8.4 Calculation of the transverse force per meter of the foundation length - 20
2.8.5 Bending moment acting on the edge of the foundation block - 20
2.8.6 Determination of the required area of ​​cushion reinforcement - 20
2.8.7 Testing the strength of the cushion against the action of transverse force - 20
2.9 Determination of the diameter of the lifting loops - 20
3. Features of the construction of civil buildings - 22
3.1. Technological map on the facade finish - 22
3.1.1 Map application area - 22
3.1.2 Calculation of the volume of work - 22
3.1.3 Calculation of labor costs and wages - 22
3.1.4 Work instructions - 23
3.1.5 Safety Instructions - 24
3.1.6 Calculation of technical and economic indicators - 25
3.2. Schedule of work production - 25
3.2.1 Calculation of the amount of work - 25
3.2.2 Statement of labor and machine time costs - 27
3.2.3 Selection of the leading mechanism - 29
3.2.4 Statement of the need for building structures and materials - 30
3.2.5 Work guidance - 31
3.2.5.1 Earthworks - 31
3.2.5.2 Installation of foundations - 31
3.2.5.3 Waterproofing foundations - 31
3.2.5.4 Brick masonry walls - 32
3.2.5.5 Installation of reinforced concrete structures - 33
3.2.5.6 Roofing - 33
3.2.5.7 Floor installation - 34
3.2.5.8 Finishing works - 34
3.2.6 Safety Instructions - 35
3.2.6.1 Excavation work - 35
3.2.6.2 Installation of reinforced concrete elements - 35
3.2.6.3 Roofing work - 36
3.2.6.4 Electrical work - 36
3.2.6.5 Finishing works - 37
3.2.7 Calculation of technical and economic indicators - 38
Conclusion - 39
References - 40

Note: File format - RAR archive: Drawings in the format: DWG - Autodesk AutoCAD + Explanatory note in the format: DOC - Microsoft Office Word 2003